It’s Day 3 of our Jon Jon (a.k.a romper or longall) sew-along and today we are going to finish our project. For those of you just joining us, we are sewing the Johnny Pattern from The Children’s Corner. If you missed Day 1 or Day 2 of our sew-along, no problem! This sew-along will stay on the site and you can catch up anytime you like. If you have any questions, just post them in the comments section of the blog and I’ll get back to you.
TODAY’S GOAL: Finish our Jon Jon!
We left off with the our lining and main fabric sewn together along the top edge, around the neck and arms. With strap corners clipped, we are ready to get started.
STEP 1: Turn your Jon Jon right side out. You can use the flat or dull end of a skewer to carefully and slowly poke out the corners of the straps. Now Iron.
STEP 2: This is optional. Try topstitching that seam.
Just stitch 1/8 of an inch from the edge all the way around that top seam for a nice finished look.
STEP 3 – It’s time to sew the seams at the bottoms of our pant legs. Pull out the instructions that came with the pattern. You want to look at step 8 in the printed instructions. NOW, a little pep talk (the one I wish someone had given me). There is a part of sewing that feels like origami and this is that part. Just trust the pattern and trust the instructions. It will work.
Pick a pants leg and grab the bottom side seam of the romper.
Working with the same leg, grab the side seam of the lining with your other hand.
Now, with indifference to the rest of the outfit, flip those side seams around so that you have smacked them together, right sides facing each other and side seams matching.
PIN and sew. Now, flip right side out and press. Repeat for the other leg.
STEP 4 – Press the pant leg seams.
STEP 5 – Now, the only raw edges left are those for the crotch. Simply fold the raw edges under, pin (matching center seams), and sew.
STEP 6 – Now you are ready to apply your snaps. I use the snap setter and size 16 long prong snaps. They offer full instructions on their website and on the package. For longalls, I apply 10 sets of snaps. For shortalls, I apply 4 sets.
STEP 7 – Time to work your button holes and add buttons. You can have two buttons on each strap or one larger button which ever you prefer.
TIP: You will NEVER regret working a test button-hole using scraps of your main fabric and lining fabric. It’s a great way to catch mistakes or to make adjustments before working them on your finished garment.
YOU ARE DONE! You did it : )
Now it’s time for the catwalk…
Have a great weekend, time to make another…